Baby Lock Enterprise BNT10L, Инструкция и справочник

Страница: 236 / 312

APPENDIX ————————————————————————————————————————————————————————————————————————————
234
Appliqué Sewing
This section describes the procedure for sewing appliqués.
Sewing appliqué patterns
Some of the built-in embroidery patterns can be
used for sewing appliqués. Follow the procedures
described below to sew appliqués using the
patterns with “APPLIQUE MATERIAL”, “APPLIQUE
POSITION” or “APPLIQUE” in the region display at
the top of the thread color sequence display.
*Depending on the thread color display setting, the
display may appear as (Appliqué Material),
(Appliqué Position) or (Appliqué).
■
Procedure for sewing appliqués
1
Place stabilizer on the back of the appliqué
fabric/material.
2
Frame the fabric for the appliqué (from step
1
) in the embroidery frame, and then sew
an “APPLIQUE MATERIAL” pattern. The line
that indicates where the appliqué will be cut
out is sewn, and then the machine stops.
3
Remove the appliqué fabric from the
embroidery frame, and then carefully cut
along the sewn cutline.
• If the appliqué is cut out along the inside of
the sewn cutline, the appliqué may not be
correctly attached to the fabric. Therefore,
carefully cut out the appliqué along the
sewn cutline. If this step is not performed
carefully, the appliqué will not be cleanly
finished. In addition, carefully remove any
excess threads.
4
Frame the base fabric or garment in the
embroidery frame, and then sew an
“APPLIQUE POSITION” pattern. The
appliqué position is sewn, and then the
machine stops.