Baby Lock Enterprise BNT10L, Инструкция и справочник

Страница: 68 / 312

EMBROIDERING TUTORIAL —————————————————————————————————————————————————————————————————
66
■
Continuing embroidering
To sew the same pattern again, touch .
X
The embroidering screen appears so the
same pattern can be sewn again.
To select a new pattern, touch .
X
The pattern type selection screen appears.
Note
●
Automatic Lock stitching can be set so that
it is sewn at the beginning of the
embroidery, when starting to sew after
changing thread colors, and when
trimming the thread. (Refer to “Automatic
Lock Stitch Setting” on page 134.)
●
The sewing speed can be changed, even
while the pattern is being sewn. (Refer to
“Maximum Sewing Speed Setting” on
page 139.)
Stopping embroidering
The machine can be stopped during sewing.
■
Temporarily pausing
1
Press the start/stop button.
X
The machine stops and the start/stop
button lights up in red.
• The thread is not trimmed.
• To continue sewing, after checking that the
upper thread is taut, touch the unlock key,
and then press the start/stop button.
Memo
●
If the Reserve Stop key is touched while
embroidery is being sewn, the machine
stops sewing before the next color begins.
(Refer to “Stopping the machine at the
next color change” on page 140.)
●
Before starting to sew, the machine can be
set to stop at any thread color change.
(Refer to “Specifying pause locations
before embroidering” on page 140.)