Baby Lock Enterprise BNT10L, Инструкция и справочник

Страница: 285 / 312

Maintenance 283
7
—————————————————————————————————————————————————————————————————————————————————————
■
Oiling the needle bars
From embroidering screen, select one needle
bar at a time. (Refer to page 63 for needle bar
screen). Turn the handwheel counterclockwise
bringing the needle bar to its lowest position.
Put one drop of oil, as high as possible on the
needle bar above the felt washer.
1
Apply oil here.
• Too much oil may drip onto sewing
project.
Note
●
Put a drop of oil onto the hook once a day
before use.
●
Apply one drop of oil on the lower needle
bar above the felt washer every 40 – 50
hours of sewing time.
●
Apply only sewing machine oil. Use of
any other type of oil may result in damage
to the embroidery machine.
●
Do not apply too much oil. Fabric or
thread may get contaminated. If too much
oil is applied, wipe off any excess with a
rag.
●
If the thread breaks while sewing or the
operating noise of the hook becomes loud,
apply oil onto the race hook.
About the maintenance
message
Once this message appears, it is recommended to
take your machine to your nearest authorized Baby
Lock retailer for a regular maintenance check.
Although this message will disappear and the
machine will continue to function once you touch
, the message will display several more
times until the appropriate maintenance is
performed.
Please take the time to arrange for the maintenance
that your machine requires once this message
appears. Such steps will help to ensure you receive
continued, uninterrupted hours of machine
operation for the future.