Baby Lock Enterprise BNT10L, Инструкция и справочник

Страница: 259 / 312

Using the Optional Cap Frame 257
7
—————————————————————————————————————————————————————————————————————————————————————
4
Insert the two thumb screws at the bottom
of the cap frame driver into the v-cuts in the
carriage, and then place the mounting plate
of the cap frame driver on top of the frame-
mounting plate of the carriage.
1
Notch in the carriage
2 Thumb screw of the cap frame driver
3 Mounting plate of the cap frame driver
4 Frame-mounting plate of the carriage
5
Insert the pins on the frame-mounting plate
of the carriage into the holes in the
mounting plate of the cap frame driver.
1 Pins on the frame-mounting plate of the
carriage
2 Holes in the mounting plate of the cap frame
driver
6
Insert and tighten the two upper thumb
screws in outer holes of mounting plate of
cap frame driver.
7
While pushing in the cap frame driver
toward the machine so that it is fully
inserted, tighten the two lower thumb
screws to secure the cap frame driver.
X
This completes the installation of the cap
frame driver.
■
Adjusting the cap frame driver
1 L-shaped bracket
2 Ring
Memo
●
If the same machine is being used, the
adjustment to the cap frame driver is only
required the first time that the machine is
used.