Baby Lock Enterprise BNT10L, Инструкция и справочник

Страница: 257 / 312

Using the Optional Cap Frame 255
7
—————————————————————————————————————————————————————————————————————————————————————
■
Golf Style
1 Face: Not divided
2 5 sections
Memo
●
Check if this area 1 is covered with mesh.
Note
●
There is no centerline that can be used as
a guide for placing the cap in the cap
frame. Before framing the cap, use a
charcoal pen to mark the centerline.
■
Cap fabric not recommended for embroidering
• Caps with a front panel that is less than
50 mm (2 inches) high (such as a sun visor)
• Children’s caps
• Caps with a brim that is longer than 80 mm
(3-1/16 inches)
Fabric precautions
■
Cap fabric recommended for embroidering
• 35%Cotton / 65%Polyester
• 100%Cotton
• 80%Wool / 20%Nylon
• 15%Wool / 85%Acrylic
■
Cap fabric not recommended for embroidering
If caps of the following types of fabric are used,
they will be very difficult to frame, easily wrinkled,
or easily shrink.
• Polyester Foam
• Stretch material
• Melton Wool
• 100%Nylon
• Suede
Preparing to use the cap
frame
■
Installing the cap frame driver
Touch
→ → →
in order to view a video of the operation
on the LCD (refer to page 230).
Remove the embroidery frame holder from the
carriage on the machine, and then install the cap
frame driver. Before removing the embroidery
frame holder, remove the embroidery frame.
(Refer to “Removing the embroidery frame” on
page 69.)
CAUTION
Otto
International,
Inc. cap model
number
(Example)
OTTO37-024
Mesh backing
on the back of
front panels
(soft or hard)
Constructed
firm front
Ease of framing
(hooping)
Fairly easy
Backing 1 to 2 ply
●
Before changing any embroidery frame
holder, make sure your machine is
turned off.