Baby Lock Enterprise BNT10L, Инструкция и справочник

Страница: 29 / 312

Setting Up the Machine 27
1
—————————————————————————————————————————————————————————————————————————————————————
Setup location
Set up the machine in a location that meets the following requirements.
• Position the machine a minimum of 50 mm (2 inches) away from the wall
• Allow sufficient space around the machine
• Place no objects within the moving range of the embroidery frame
• Set-up machine near an electrical outlet
• Use a level and stable surface, such as a desk or stand.
• Use a surface that can support the weight of the machine (about 42 kg (92 lb))
• Allow open space around the ventilation slots found on the rear underside of the machine
CAUTION
Note
●
For your safety: Since the machine weighs approximately 42kg (92 lb), do not set it up on an
unstable table or desk.
785 mm
(31 inches)
Minimum of
50 mm
(2 inches)
589 mm
(23-1/4 inches)
More than
350 mm
(13-3/4 inches)
More than
210 mm
(8-1/4 inches) 560 mm
(22 inches) 220 mm
(8-3/4 inches)
●
In order to prevent malfunctions or damage, do not set up the machine in a location
exposed to the following conditions.
Liquids, such as water Extreme dust
Direct sunlight
Blocked ventilation slots
Insufficient space
Objects within the moving range of
the embroidery frame
An unstable surface
Extremely high or extremely low
temperatures. The operating
environment should be between
5 °C (40 °F) and 40 °C (104°F).
Connection to extension
cords or multiple
adapters