Avocent MERGEPOINT 53XX SP MANAGER, Инструкция по установке и эксплуатации

Страница: 99 / 204

Chapter 6: Administration Tasks Not Performed in the Web Interface
85
In this example, the -t option is required to launch an interactive session. The username is the
account name of the authorized user. The device name is the name/alias that was assigned to the
device by the MergePoint SP manager administrator (used only when accessing a device).
To access the MergePoint SP manager console, omit the device name:
a
dmin@MergePoint:~$ ssh -t admin:@MergePoint_IP_or_DNS_name
The MergePoint_IP_or_DNS_name is the IP address of the MergePoint SP manager or its DNS
name. The command is one of the MergePoint SP manager specific device management commands
described in the SSH Passthrough table.
User shell
After logging in the MergePoint SP manager console via SSH command or SSH applications (such
as PuTTY or Telnet) non-admin users see a menu like the one shown in the following example.
Access Devices
Change Password
Logout
Admin users can get to the same menu either by entering the rmenush command on the SSH
command line or by entering
/usr/bin/rmenush
on the command line after login. You can move
from one item to another on the menu and submenus by using the keyboard arrow keys. A line (-)
appears next to the selected item.
When Access Devices is selected, a menu appears with a list of devices that the user is authorized
to access. After a device is selected, pressing the
Enter or Return key brings up the list of actions
the user is authorized to perform on the device.
Not all listed actions are supported for all service processors. The following example shows the
service processor action menu for an HP iLO/iLO2 service processor.
HP iLO/iLO2
Access the service processor's console
Access the device's console via SoL
Manage power
Reset SP
Manage the event log
View sensor output
Start Telnet session
Start SSH session
Enable native IP
Disable native IP