Avocent MERGEPOINT 53XX SP MANAGER, Инструкция по установке и эксплуатации

Страница: 76 / 204

62
MergePoint Service Processor Manager SP53XX Installer/User Guide
2. Select Enable and specify the following information:
a. In the Server IP field, type the IP address of the NFS server.
b. In the Mount Directory field, type the directory pathname exported from the NFS server.
c. From the Protocol drop-down menu, select the mount protocol.
3. Click Apply.
Remote Control
You may connect to a Remote Desktop Protocol (RDP) or Virtual Network Computing (VNC)
server remotely through the MergePoint SP manager.
To connect to an RDP server:
1. In the side navigation bar, click a target device name.
2. Click the Remote Control tab.
3. In the top navigation bar, click RDP. The RDP window appears.
4. In the Server field, type the host operating system IP address (or hostname).
5. Click Connect.
To connect to a VNC server:
1. In the side navigation bar, click a target device name.
2. Click the Remote Control tab.
3. In the top navigation bar, click VNC. The VNC window appears.
4. In the Server field, type the host operating system IP address (or hostname).
5. In the Port field, type the port of VNC server.
6. Click Connect.
Diagnostics
The Diagnostics tab provides network trace and debugging tools by collecting all IP packets from
an exchange between a network interface of the MergePoint SP manager and a target device.
Traced information is saved to a trace file that can be downloaded. If needed, the downloaded trace
file can be sent to Avocent technical support for troubleshooting assistance.
This trace and debug tool is implemented by tcpdump (see http://www.tcpdump.org/ for more
information). First set up the data collection parameters before starting the tracing process. When
the debug stops, click the Download button to create a download link.
To start the network debug:
1. Click the Diagnostic tab.
2. In the top navigation bar, click Debug.