Avocent MERGEPOINT 53XX SP MANAGER, Инструкция по установке и эксплуатации

Страница: 45 / 204

Chapter 2: Installation and Setup
31
- or -
Click a group name from the explorer tree in the side navigation bar, click Configuration in the
top navigation bar, then click Delete.
To add a managed target device to a device group:
1. Click the Targets tab, then click Targets in the top navigation bar.
2. In the Managed Targets list, select the target device you wish to add to a group, then click Add
Targets to Group.
3. From the Group Name drop-down menu, select the group to which you wish to add the
target device, then click Apply.
To configure device group actions:
1. Click System - Setting.
2. Enter the number of target devices to power on simultaneously in a group.
3. Enter the time interval in seconds to elapse between power on each target device in a series of
grouped target devices.
4. Enter the number of target devices to power off simultaneously in a group.
5. Enter a command delay to power off units in a series (seconds).
6. Click Apply.
Managing SP Profiles (Admin users only)
The MergePoint SP manager supports two types of SP profiles: default and user. Default SP
profiles define 18 default types of target devices, while user SP profiles define new target device
types. The Admin user can view the settings of the default SP profiles and create, modify or delete
a user SP profile. You may need to create a new SP profile if a target device does not work properly
with any of the default SP profiles.
The SP profile provides parameters, values or functions of target devices, such as:
• Protocol: used for communications between the MergePoint SP manager and target devices.
• Family: contains a list of pre-defined SP profiles and customX (X=1, 2, 3) SP profiles.
NOTE: The customX family needs a new Expect script which has been created using the name
talk_customX.exp. (For more on creating new Expect scripts, see Profile Configuration on page 172.)
• Command Template: contains a list of templates for SP profiles. You may create a new
template by clicking SP Templates Configuration. A MindTerm session will activate the
sptemplate utility. See To use the sptemplate utility to create a new template: on page 176. The
new template is added to lists of command templates and becomes available for using when
configuring target devices. The following target device types do not need a template:
• IPMI type devices.