Avocent MERGEPOINT 53XX SP MANAGER, Инструкция по установке и эксплуатации

Страница: 47 / 204

Chapter 2: Installation and Setup
33
To modify a user SP profile:
1. Click Targets - SP Profiles.
2. In the User SP Profiles list, click the name link for the SP profile you wish to modify and enter
the new information.
3. Click Apply.
Managing Default Users (Admin users only)
To perform management operations through a MergePoint SP manager, a username and password
are required to access the target device. To simplify the authentication process, you may configure
a default username and password for specific target devices. When a management operation is
requested, the MergePoint SP manager searches the entire list of default usernames to see if there is
an appropriate one for accessing the target device. You may create multiple entries of the same
username with a different password for each. One preset username and password for each type of
target device is created by default.
Table 2.4: Default Service Processor Usernames and Passwords
Type Username Password
IPMI 1.5 admin admin
IPMI 2.0 admin admin
IBM RSA II USERID PASSW0RD
IBM BladeCenter USERID PASSW0RD
DELL DRAC 3 root calvin
DELL DRAC 4 root calvin
DELL DRAC 5 root calvin
DELL 10G root calvin
HP IPMI admin admin
HP iLo1 admin opensource
HP iLo2 Administrator opensource
SUN iLom root changeme
SUN Alom admin admin
Fujitsu Siemens iRMC admin admin
DELL DRAC MC root calvin
HP BladeCenter Administrator admin