Avocent MERGEPOINT 53XX SP MANAGER, Инструкция по установке и эксплуатации

Страница: 194 / 204

180
MergePoint Service Processor Manager SP53XX Installer/User Guide
Start Telnet session
Start SSH session
Exit
Back
Not all listed commands are supported on every type of target device. If you select an unsupported
command, an error message displays that lists the supported commands.
The first time you select any action to test, you are prompted to enter a username and password. If
local authentication is specified for the target device, enter the username and password that you
entered to access the MergePoint SP manager. If another authentication method is specified for the
target device, use the appropriate username and password for the specified authentication method.
The test command uses the same authentication and authorization processes that the MergePoint SP
manager uses in its normal operation.
See the following examples:
• The MergePoint SP manager uses local authentication, and the administrator logs into the
MergePoint SP manager using the username and password pair: root/root_password.
• The administrator tests the rsa.default command template on a server called
rack1_ibm_e306_rsa, which is configured for RADIUS authentication with username scottb
and password cycl123. The administrator must enter scottb and cycl123 to perform the test.
• The administrator tests the rsa.default command template on a server called
rack2_ibm_e306_rsa, which is configured for LDAP authentication with username sburns and
password 123cycl. The administrator must enter sburns and 123cyclto perform the test.
• The administrator tests the rsa.default command template on a server called
rack3_ibm_e306_rsa, which is configured for local authentication. The administrator must
enter the same username/password pair that was entered to access the MergePoint SP manager
(root/root_password.) to perform the test.
Each set of commands may be tested in any order after the login test is performed. Errors are
generated if a command is entered out of logical order; for example, if the Reset command is issued
for a server that is not powered on. After any test you can return to the editor to make changes.
While using the editor to edit, copy or create a new template, you can edit or delete fields and add
comments. When the file is saved, error checking is performed. If an error is found, you are
prompted either to enter the editor again to fix the error, or to discard the changes.
The following are examples of commands:
[rsa.default]
type = rsa_II
login_prompt = rname:
pass_prompt = sword:
cmd_prompt = [a-zA-Z0-9 #]+>
logout_cmd = exit