Deploying Avaya IP Office™ Platform IP500 V2
Page 110
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? [email protected]
8.9 DS16B/30B Port Mode Selection
Each IP500 DS16B and IP500 DS30B external expansion module in a system can support either DS phone ports or BST
phone ports. The modules default to DS phone port operation. The operating mode is set through the system
configuration.
·
!
WARNING
This process requires the IP Office system to reboot in order to complete the changes. The reboot ends any
current calls and services.
·
The process of loading the appropriate firmware for the selected mode takes up to 10 minutes during which time
the module is not available.
To change the IP500 DS16B/30B module port mode:
1. Within the IP Office configuration, select
Control Unit. The control unit and external expansion modules are
listed.
2. The IP500 DS16B and IP500 DS30B modules are listed as DIG ADPx16 RJ45 and DIG ADPx30 RJ45.
3. Select one of the external expansion modules. In the unit details, the Operating Mode drop-down list is used to
select what type of phones the module supports. Select the required mode.
·
For DS ports, select DS - 1400, 9500, 5400, 2400, T3, 440 Series Phones.
·
For BST ports, select BST - T7000, M7000 Series Phones.
4. Click OK.
5. Click on the
save icon and save the updated configuration back to the IP Office system.