Deploying Avaya IP Office™ Platform IP500 V2
Page 31
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? [email protected]
System Overview: Power Supplies and Cables
1.9.2 Power Supply Cords
Each control unit and expansion module requires a switched power outlet socket rated at 110-240V ac, 50-60Hz.
Connection from that power outlet socket requires an appropriate locale specific power cord which is not supplied with
the unit and must be ordered separately. Note that if the power cord includes an earth lead, the power outlet must be
connected to a protective earth.
Power cords must not be attached to the building surface or run through walls, ceilings, floors and similar openings.
Installation measures must be taken to prevent physical damage to the power supply cord, including proper routing of
the power supply cord and provision of a socket outlet near the fixed equipment or positioning of the equipment near a
socket outlet.
For locales not detailed below an appropriate power cord must be obtained locally.
Power Cord Type
Power Outlet Plug Type
Locales
SAP Codes
Earthed Power Cords (IEC60320 C13)
Control Units
·
IP500 V2.
IP500 External Expansion Modules
·
BRI So8.
·
Digital Station 16/30.
·
Phone 16/30.
CEE7/7 (Schuko)
Europe and
South Africa.
700289762
BS1363
Czech Republic,
Ireland, United
Kingdom.
700289747
NEMA5-15P / CS22.2
No.42
North, Central
and South
America.
700289770
Unearthed Power Cord (IEC60320 C7)
IP500 External Expansion Modules
·
Analog Trunk 16.
CEE7/16 (Europlug)
Europe and
South Africa.
700213382
BS1363
Czech Republic,
Ireland, United
Kingdom.
700213374
NEMA1-15
North, Central
and South
America.
700213390
Korea.
700254519