Deploying Avaya IP Office™ Platform IP500 V2
Page 11
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? [email protected]
System Overview:
1. System Overview
The Avaya IP Office IP 500 V2 is also known as "IPO IP500 V2 Cntrl Unit", "IP Office IP 500 v2", "IPO IP500 v2", "IP 500
V2", "IP500 V2", "IPO 500v2 System Unit Assembly" or "IP Office 500 v2". Throughout this documentation the term
IP500 V2 is used.
This document is intended to assist with the installation of an IP Office system running in IP Office standard mode (IP
Office Essential Edition or IP Office Preferred Edition) using an IP500 V2 control unit.
This documentation does not cover installation of IP Office Basic Edition, IP Office Basic Edition - Norstar Mode or IP
Office Basic Edition - PARTNER® Mode systems which each have their own separate installation documentation.
·
The IP Office is a converged voice and data communications system. It should therefore only be installed by
persons with telephony and IP data network experience.
·
Installers must be trained on IP Office systems. Through its
Avaya University
(AU), Avaya provides a range of
training courses including specific IP Office implementation and installation training. It also provides certification
schemes for installers to achieve various levels of IP Office accreditation.
·
It is the installer’s responsibility to ensure that all installation work is done in accordance with local and national
regulations and requirements. It is also their responsibility to accurately establish the customer’s requirements
before installation and to ensure that the installation meets those requirements.
·
You should read and understand this documentation before installation. You should also obtain and read the Avaya
Technical Bulletins relevant to recent software and hardware releases to ensure that you are familiar with any
changes to the IP Office equipment and software.
48