Deploying Avaya IP Office™ Platform IP500 V2
Page 218
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? [email protected]
13.4.2 BRI So8
The So8 module can be used to add ETSI BRI S0-interface ports to the IP Office system. These ports can then be used
for the connection of ISDN devices.
Feature
Details
Locales
Supported in all
IP Office locales
.
Software Level
IP Office core software level 1.0 minimum. Bin file = nas0-16.bin.
Included
Power supply unit (see below) and Expansion Interconnect cable.
Power Supply
The unit is supplied with an earthed 3-Pin, 60W external power supply unit. The PSU has an
integral power cord for connection to the unit's DC I/P socket. A locale specific
IEC60320 C13
power cord
for the external PSU is required but is not supplied with the unit.
Mounting
The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be wall or rack mounted using the
IPO IP500 RACK MNTG KIT V3
.
Dimensions
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.
Weight
Unboxed: 2.8Kg/6.3lbs. Boxed: 4.1Kg/9.2lbs.
Module Front
Port
LEDs
·
Green On = Connected.
·
Green Flashing = Activity.
Module
Center
LED
The center LED on all external expansion modules is used to indicate the overall state of the module as
follows:
·
Red flashing = Module starting up/Loading firmware.
·
Red on = Error.
·
Green on = Module okay.
43
30
238