Deploying Avaya IP Office™ Platform IP500 V2
Page 219
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? [email protected]
System Components: IP500 External Expansion Modules
Module Rear
Ports
Description
BRI
RJ45 socket. Used for connection of ISDN terminal devices.
Note: These ports appear a lines within the IP Office configuration. However they cannot be used for
connection to external BRI lines.
DC I/P
DC power input port. Used for connection of the power lead from an Avaya 60W external power supply
unit supplied with the expansion module. A locale specific
IEC60320 C13 power cord
for the external
PSU is required but is not supplied with the module.
DTE
25-Way D-Type socket. For Avaya use only.
EXPANSION
RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the
Expansion Interconnect cable supplied with the module.
Function ground point. Used for connection of a
protective or functional
ground if required. On older
modules where this screw is not present, the top-center cover screw should be used instead.
Part Codes and Related Equipment
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system. Expansion modules include an external power supply unit (PSU) and an appropriate
interconnect cable. They do not include a locale specific power cord for the external PSU or any phone extension cables.
Item
Variant
Country
SAP Code
IPO 500 BRI So8
All
700449515
IEC60320 C13 Power Cord
CEE7/7
Europe
700289762
BS1363
United Kingdom
700289747
NEMA5-15P
America
700289770
Mounting Kit
IPO IP500 RACK MNTG KIT V3
All
700503160
350
353
30
360
355
35