Deploying Avaya IP Office™ Platform IP500 V2
Page 346
15-601042 Issue 30j (18 May 2015)
IP Office™ Platform 9.1
Comments on this document? [email protected]
13.13 Physical Ports
The following port types are found on the IP Office control unit and external expansion modules:
·
ANALOG
Used for the connection of external analog trunks.
·
AUDIO
Used for input of an external music on hold source.
·
BRI
Used for connection of BRI trunks (Quad BRI trunk card). In IP Office standard modes they can also be used for
ISDN terminals devices (So8 module).
·
BST (RJ21)
and
BST (RJ45)
Connections for M-Series and T-Series phones supported by IP Office. Also for Digital Mobility Solution system
supporting 4100 Series and 7400 Series phones. See supported
Avaya BST digital phones
.
·
DC I/P
Power input from external power supply unit.
·
DS
Connection of Avaya digital station phones supported by IP Office.
·
RS232/DTE
Used for control unit maintenance under Avaya guidance. On expansion modules not used.
·
EF
Emergency power failure ports found on the ETR6 base card.
·
ETR
Only supported on IP500 V2 control unit running in IP Office Basic Edition - PARTNER® Mode or IP Office Basic
Editions.
·
EXPANSION
Used for interconnection of external expansions modules and control units.
·
EXT O/P
Used to control external relay systems. The port provides two switchable (on, off and pulse) controls.
·
Used for connection of functional or protective ground if required.
·
LAN
10/100Mbps Ethernet LAN ports.
·
PF
Analog power fails ports.
·
PHONE
(POT)
Analog phone extension ports. On older units these ports are labeled as POT ports.
·
PRI
PRI trunk ports.
349
349
351
352
352
39
353
353
360
354
354
355
174
356
357
358
358
359