Avaya Customer Interaction Express 1.0, Руководство пользователя

Страница: 37 / 344

Installing the server components
Edition: 1.1 03/08/2007 37
Using the guided installation
Starting the dialog
To start the guided installation, follow these steps.
1. Double-click Guideline.exe . The Installation Customer Interaction Express Version dialog
opens.
2. Click Next . The End-User License Agreement (license agreement) dialog opens.
3. To accept the license agreement, click I Agree . You can install the components one after the other. If
you accept the license agreement centrally, a separate license agreement does not appear when you
install the individual components.
Installing a component
1. To install a component, go to the required component.
2. Click Install . The setup for that component opens.
Updating a component
1. To update a component that is already installed, click Modify/Repair .
2. The setup for that component opens.
Removing a component
1. To remove a component that is already installed, click Remove .
Entering default settings centrally
You can specify the following settings in the guided installation. These are accepted by the installations as
the default settings. This saves you from having to make the same settings in each installation.
Settings Explanation
InstallPath Specifies the folder where the components are installed. In general, use
the default setting c:\Programs\Avaya\CIE.
To change the folder, click .
Host name of the CORBA
Naming Service Specify the host name or TCP/IP number of the PC running the Corba
naming service. Do
not use localhost as the host name.
Port As a general rule, use the default port 2809.
Host name of Trace
system server Specify the host name or TCP/IP number of the PC running the trace
server.