© 2021 Avaya Inc. All rights reserved
Release Notes for Avaya Collaboration Unit CU360
Avaya CU360 Setup and Control 21
Control the Call with a Bluetooth Headphone or Speakerphone.
For how to pair your Bluetooth headphones (or speakerphone) and CU360 via Bluetooth and how
to locate call/disconnect/volume/mute buttons on the headphones, refer to the Help Guide of your
Bluetooth device.
When a call is in progress (or is incoming), if the app you are using on the CU360 registered itself
as a telephony enabled app, you will be able to hear the ringing tone on your paired BT headset
an
d to pick up the call using the “Call” button on the headset (usually a green or call symbol).
Once the call is established, you can adjust the /- from the paired BT headset with a
feedback on the CU360 device visible on the screen.
You can also dis
connect the call from the paired BT headset using the “Disconnect” button on the
headset (usually a red or disconnect symbol).
Important
•
The mute button on your BT headset (or speakerphone) acts only locally on the
BT device and its status does not reflect on the CU360 device.
•
You cannot use the BT mute button to raise your hand in Spaces or other
moderated meetings.
•
Please note that when disconnecting a call from a BT device, no disconnection
confirm will be displayed on the CU360 device, even if configured.
Embedded Camera and LEDs
This section refers to the capabilities of the embedded 4K camera. It is possible to connect to the
device an external Avaya USB camera, see for instance Support for Avaya RC100 as USB
Camera
Manual PT and Digital PTZ
The camera can perform a manual pan and tilt (PT). Lightly touch around the camera (where there
are the small dents) for manual pan and tilt.
Important:
•
To allow best
performances
for the auto-tracking camera feature, do not adjust the camera
to the left or the right (panning). Adjust it only up or down (tilting).
The local camera can also perform a digital PTZ (Pan/Tilt/Zoom, ePTZ) up to 5x.
The camera is automatically zoomed-in in an intermediate position at the start-up of the CU360
App.