ACD contact center features
166 Communication Manager Guide to ACD Call Centers
Support of contact center features
Information transport supports these contact center features:
●
Enhanced Look-Ahead Interflow—routes calls from busy contact centers to centers that
are less busy (see
Look-Ahead Interflow (Category A only)
on page 171).
Note:
Note:
Look-Ahead Interflow information can be forwarded using information
transport or the traditional codeset 6/7 LAI IE.
●
Best Service Routing—routes calls to the best available agents wherever they are (see
Best Service Routing (Category A only)
on page 94).
●
Universal Call ID—provides a means to collect and trace call data from multiple contact
centers (see
Universal Call ID
on page 238).
Determining user information needs
The network byte limit on user information contents (the user data part of the UUI IE) must
be large enough to carry the data needed for the customer application.
If you want to forward information over a network that does not support at least 82 bytes of
user data, you must determine the space required for the application and adjust priorities
accordingly.
Considerations
●
Enhanced information forwarding has been tested with several major carriers. To find
out if these capabilities work with your carrier, check with your account team for the
most current information. If testing has not been done to verify operation over the public
networks involved with the preferred specific configuration, use of private ISDN trunking
between the nodes should be assumed until successful testing has been completed.
●
Any communication server that acts as tandem node must have priorities assigned to
the Shared UUI features for non-QSIG trunk groups. Even if this communication server
does not create anything, the priorities must be set correctly to pass the information
along. For more information, see the
Troubleshooting
on page 167 section.
●
The
Send codeset 6/7 LAI
trunk group option operates independently of the
UUI
IE Treatment
trunk group option. However, if you turn both of these options on, you’ll
send the same information twice and possibly exceed the maximum ISDN message
size. The communication server provides a warning message when both options are
administered. There are two ways to correct when the user data exceeds the maximum
message size, either:
— put a blank in the priority fields for
VDN Name
and
Other LAI Information
on
the Shared UUI Feature Priorities form, or
— disable the
Send codeset 6/7 LAI
option.
Содержание Communication Manager Contact Center
Страница 4: ......
Страница 52: ...Automatic Call Distribution ACD basics 52 Communication Manager Guide to ACD Call Centers...
Страница 280: ...ACD contact center features 280 Communication Manager Guide to ACD Call Centers...
Страница 434: ...ZCS 434 Communication Manager Guide to ACD Call Centers...