ACD contact center features
188 Communication Manager Guide to ACD Call Centers
To increase the chance that there will be a trunk available to place the second leg call,
some trunks in the two-way trunk group can be reserved for outgoing-only use by using
Call-by-Call Service Selection Usage Allocation capabilities.
1. On the ISDN Trunk Group form, set the following fields:
●
Direction
= two-way
●
Service Type
= cbc
●
Usage Alloc
= y
●
Disconnect Supervision In?
= y
●
Disconnect Supervision Out?
= y
2. Assign the incoming call Network Specific service (NSF) types on the ISDN Trunk
Group form CBC Trunk Group Usage Allocation page to limit how many trunks can be
used for incoming calls. For example, if all incoming calls are “mega800” and two
trunks out of a total of 100 are to be reserved, set the
Service
field to mega800 and
set the
Min# Chan
field to 2 and the
Max# Chan
field to 98. If the incoming calls are
receive with two different NSF types, for example, “sdn” and “mega800”, then assign
both for the same Min# and Max# values. Refer to the following figure.
CBC Trunk Group Allocation
Note:
Note:
The NSF coding for MCI WorldCom VNET service is defined as “sdn” on the
communication server. The MCI 800 service is defined as “mega800” on the
communication server.
Signaling Group form
For NCT, the
Network Call Transfer
field on the Signaling Group form must be set to
y. Refer to the following figure:
change trunk-group 29 Page 6 of 25
CBC TRUNK GROUP ALLOCATION
Usage Allocation Plan 1 Usage Allocation Plan 2 Usage Allocation Plan 3
Min# Max# Min# Max# Min# Max#
Service/Feature Chan Chan Service/Feature Chan Chan Service/Feature Chan Chan
mega800 2 98
sdn 2 98
Содержание Communication Manager Contact Center
Страница 4: ......
Страница 52: ...Automatic Call Distribution ACD basics 52 Communication Manager Guide to ACD Call Centers...
Страница 280: ...ACD contact center features 280 Communication Manager Guide to ACD Call Centers...
Страница 434: ...ZCS 434 Communication Manager Guide to ACD Call Centers...