Network Call Redirection (NCR) (Category A only)
Issue 1.0 May 2003
185
The
~r
command takes up two digit positions in the vector step. This works with
queue-
to-best
or
check-best
vector steps. No change to the vector steps is required for NCR
with BSR.
Trunk Group form
If the NCT feature is subscribed to for the NCR feature, only PRI ISDN 2-way trunks may
be used for the incoming-call trunk groups to be administered for vectoring activation of
NCT, since the software selects a trunk from the same trunk group to set up the second leg
call. Refer to the following figures:
Supplementary Service Protocol: NCT
For non-BSR applications or for standard or enhanced Look-Ahead Interflow
applications replaced by NCR supplementing BSR applications. . .
Call Vector form
●
leftmost position in the
route-to number
vector step
~r for each vector that will invoke
NCR
Required forms – NCR (continued)
Form
Field
Value
change trunk-group 29 Page 1 of 23
TRUNK GROUP
Group Number: 29 Group Type: isdn CDR Reports: y
Group Name: MCI-1 COR: 1 TN: 1 TAC: 729
Direction: two-way Outgoing Display? y
Dial Access? n Busy Threshold: 255 Night Service:
Queue Length: 0
Service Type: sdn Auth Code? n TestCall ITC: rest
Far End Test Line No:
TestCall BCC: 4
TRUNK PARAMETERS
Codeset to Send Display: 7 Codeset to Send National IEs: 7
Max Message Size to Send: 260 Charge Advice: none
Supplementary Service Protocol: g Digit Handling (in/out): enbloc/enbloc
Trunk Hunt: descend
Digital Loss Group: 13
Calling Number - Delete: Insert: Numbering Format:
Bit Rate: 1200 Synchronization: async Duplex: full
Disconnect Supervision - In? y Out? y
Answer Supervision Timeout: 0
Содержание Communication Manager Contact Center
Страница 4: ......
Страница 52: ...Automatic Call Distribution ACD basics 52 Communication Manager Guide to ACD Call Centers...
Страница 280: ...ACD contact center features 280 Communication Manager Guide to ACD Call Centers...
Страница 434: ...ZCS 434 Communication Manager Guide to ACD Call Centers...