ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 91 / 214

Chapter 3: Monochrome Terminals ATS Setup Mode
MANU-MAXIMUS-02 Maximus Reference Manual 3-37
Revision-02
Reset Dnld
The Reset Dnld command clears the memory of the terminal, including all prompts and the
data queue (e.g., employee badge numbers, schedules, punch history). After you perform this
command the terminal displays the
Download Needed prompt at startup (see "Power Up"
on page 3-4 ). Use the following procedure to clear the terminal memory (reset the download):
1. Press the clear key repeatedly in the ATS Setup Mode menu until the terminal
displays the
Reset Dnld ( XXXXXXXX ) prompt.
2. Press the clear key to exit the reset command or press the enter key to begin the
reset. If you pressed enter the terminal displays the
CLEAR ALL MEMEORY!
{Enter} to Proceed confirmation prompt. You can press the clear key to exit
leaving the terminal memory (download) intact or press the enter key to
proceed.
If you pressed the enter key the terminal displays the second confirmation
prompt: CLEAR ALL MEMEORY! {Enter} to Confirm . Once again you can
press the clear key to exit leaving the terminal memory (download) intact or
press the enter key to proceed.
If you pressed the enter key the terminal purges the current download and
memory then reboots and returns to the initial power-up prompt (see "Power
Up" on page 3-4 ).
ATS Setup Mode
Reset Dnld (DR00rso1)
CLEAR ALL MEMORY!
[Enter] to Proceed
CLEAR ALL MEMORY!
[Enter] to Confirm