ATS Maximus MCJ2000 Series Скачать руководство пользователя страница 11

Страница: 11 / 214

Note & Warning Formats

MANU-MAXIMUS-02

Maximus Reference Manual

P-5

Revision-02

Note & Warning Formats

This section describes the note and warning formats used in this document (manual) and the
circumstances to which they apply.

Notes

Important information and tips appear as notes. Notes have a special format and appearance.
The following is an example of the note format:

Warning Formats

This document may use warnings for various potential conditions. The following are the
warning formats with descriptions of their use:

This is how a note appears in this document.

NOTE:

This format is used for an electrical danger that may injure or kill the user

DANGER

SHOCK

This format is used for a non-electrical condition that is potentially fatal to the user.

DANGER

This format is used for a hazardous condition that may cause personal injury to the user.

Warning

This format is used for a condition that may damage equipment but with little or no risk of
personal injury.

CAUTION

Содержание Maximus MCJ2000 Series























































































































































































































Результаты поиска

Содержание Maximus MCJ2000 Series

Отзывы:

Похожие инструкции для Maximus MCJ2000 Series

Бренды по названию

Популярные бренды

ATS Maximus MCJ2000 Series, Справочное руководство

Результаты поиска

Содержание Maximus MCJ2000 Series

Отзывы:

Похожие инструкции для Maximus MCJ2000 Series

Бренды по названию

Популярные бренды