ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 68 / 214

3-14 Maximus Reference Manual MANU-MAXIMUS-02
Revision-02
ATS TSD Mode Chapter 3: Monochrome Terminals
Using the TSD Mode
Once in the ATS TSD Mode menu you can navigate and make selections as follows:
• Press the clear key to cycle through the ATS TSD Mode menu items.
• Press the enter key to select the displayed item.
1. Press the clear key in the ATS TSD Mode menu to navigate between the
following items:
• Setup Mode – See "Setup Mode Parameters" on page 3-16 .
• Exit – Select Exit at the TSD Mode screen to access Setup Mode (see "Setup
Mode Parameters" on page 3-16 ).
• Restore Mfg Settings - This function is reserved for specific applications.
In typical Maximus configurations selecting the Restore Factory Settings
command results in the “ Unable to Restore Settings” response.
• Download from USB – See "Download from USB" on page 3-38 .
• Date/Time Setup – See "Date/Time Setup" on page 3-39 .
• Information Mode – See "Information Mode" on page 3-41 .
• Test Mode – See "Test Mode" on page 3-46 .
2. Press the enter key to select the currently displayed item.
• If you select Setup Mode or Exit the Re-Boot prompt appears.
See "ATS Setup Mode" on page 3-15 or "Re-Boot" on page 3-16 .
• If you select Download from USB the terminal begins the download
operation. See Appendix B, "Using USB" .
• If you select Date/Time Setup the Select Date Format prompt appears.
See "Date/Time Setup" on page 3-39 .
• If you select Information Mode the Version Info prompt appears. See
"Information Mode" on page 3-41 .
• If you select Test Mode the Reader Test prompt appears. See "Test Mode"
on page 3-46 .
ATS TSD Mode
Setup Mode