ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 37 / 214

Chapter 2: Installation Installation Guidelines
MANU-MAXIMUS-02 Maximus Reference Manual 2-5
Revision-02
Terminal Wiring Access
The Maximus provides three access points for routing wires into the terminal: two Conduit
Openings (holes) and a recessed channel that leads to the “opening to case interior” and
accepts surface wiring (see
Figure 2-2 ). In addition, the Maximus is equipped with a cable
clamp that secures surface wiring routed through the recessed channel or fed through the
lower conduit opening.
Choose the wiring method best suited to your installation. Run required communication
cabling (Ethernet, serial, or telephone line) to the location. If you have wiring for any optional
devices such as DIDO, run those wires to the terminal location following all applicable electrical
codes.
Figure 2-2 Wiring Access Locations (Rear View of Maximus)
Cable Clamp
Conduit
Opening
Conduit
Opening
Opening to
case interior
Recessed
Channel