ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 177 / 214

MANU-MAXIMUS-02 Maximus Reference Manual A-13
Revision-02
Appendix A: Biometrics Finger Placement
Figure A-10
Knuckle Placement for Finger Scanner
Use the following procedure to authenticate your fingerprint:
• Align: Position the finger where the center of the first joint meets the center of
the placement guide as shown in
Figure A-10 .
• Drop: Lower the finger evenly onto the sensor using moderate pressure as
shown in
Figure A-11 .
• Hold: Keep the finger on the sensor until the display shows the acceptance/
rejection message (e.g., “Your finger has been accepted”).
Figure A-11
Correct Finger Placement on a Finger Scanner – Side View
Sensors Without Placement Guides
Many multi-spectral sensors, such as the AccuTouch (Lumidigm), do not have a placement
guide. Use the following procedure to enroll on a multi-spectral sensor (refer to
Figure A-12 ):
1. Straighten your finger.
2. Position the pad of your finger above the center of the sensor.
3. Keep your finger straight and lower the pad of your finger evenly onto the
center of the sensor.
First knuckle rests on the
placement guide
Press the pad of your finger
gently and constantly against
the finger scanner