ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 137 / 214

Chapter 4: Color Terminals Setup Mode
MANU-MAXIMUS-02 Maximus Reference Manual 4-21
Revision-02
Figure 4-18 Comm Port Menu Screen
Use the following procedure to configure the serial communications settings:
1. To change the Baud Rate press the “F1” key to scroll through the available
rates. The currently selected value displays in the middle of the screen. The
default value is
9600 baud. The options are 1200 , 4800 , 9600 , 19200 , 38400 ,
57600 , and 115200 baud (bps).
2. To change the value for the Data Bits parameter press the “F2” key to toggle
the data bits between 7 and 8 . The currently selected value displays in the
middle of the screen. The default value is 7 data bits.
3. To change the value for the Parity parameter, press the “F3” key to scroll
between the parity options of odd , even , and none . The currently selected
value displays in the middle of the screen. The default value is odd .
4. T o change the value for the Stop Bits parameter, press the “F4” key to toggle
between 1 or 2 stop bits. The currently selected value displays in the middle of
the screen. The default value is 2 stop bits.
5. T o change the value for the Smartcard , press the “F5” key to scroll between
off , 1k or 4k . The currently selected value displays in the middle of the screen.
Set this selection to match the storage capacity of an installed smartcard or set it
to
off if the Maximus is not equipped with a smartcard.
6. Press the “F8” key to select Return To Setup and go to the Setup Mode Main
Menu screen.
03:42:04
Friday
Nov 7, 2014
Baud Rate
Data Bits
Parity
Stop Bits
Smartcard
Off
Return
To
Setup
Baud Rate XXXXXX
Data Bits XX
Parity XXX
Stop Bits X