ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 49 / 214

Chapter 2: Installation Connections
MANU-MAXIMUS-02 Maximus Reference Manual 2-17
Revision-02
Connecting the Module
The DIDO modules come equipped with Phoenix Contact PCB terminal block(s) to connect
wiring to the DIDO module. You may disconnect the terminal block(s) from the module then
connect the wiring for the appropriate module as described in the previous section.
Plug the terminal block back into the module as shown in Figure 2-19 (single module) or
Figure 2-20 (dual module).
Figure 2-19 Connecting the PCB Block on a Single DIDO Module
Figure 2-20 Connecting the PCB Blocks on a Dual DIDO Module
DIDO 1
DIDO 2