ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 206 / 214

D-8 Maximus Reference Manual MANU-MAXIMUS-02
Revision-02
Verifying Wireless Connectivity Appendix D: GSM/GPRS Setup
Verifying Wireless Connectivity
To verify wireless connectivity, use the setup menu on the terminal to test for signal strength.
This tells you how strong the wireless signal is for the terminal in its current location. Signal
strength needs to be a value of 10 or higher for connectivity and better connectivity—15 or
higher—is required for troubleshooting connections.
To test for signal strength and wireless connectivity:
1. Make sure PPP is enabled for the terminal.
2. Make sure a configured provider has been selected for the terminal.
3. Select Test Mode on the terminal.
4. In Test Mode, select GSM Signal Strength.
GSM Signal Strength displays a number, from 0 to 32, that displays the signal
strength of the wireless connection with the terminal’s antenna in its current
location.
5. Move the antenna (and the terminal, if necessary) to achieve a signal strength of
at least 10. If you are going to troubleshoot a connection, a signal strength of at
least 15 is required.
You do not need to install a SIM card to test signal strength. A SIM card can be installed later
for communication.
NOTE: