ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 61 / 214

Chapter 3: Monochrome Terminals Initial Setup
MANU-MAXIMUS-02 Maximus Reference Manual 3-7
Revision-02
Initial Setup Parameters
To enter the initial setup menu press the clear and enter keys simultaneously for 5-seconds
(maximum). Enter a password if prompted.
1. The terminal displays the default ( 192.168.001.100 ) or saved value for the Host
that provides communications to the terminal.
Press the enter key to accept the displayed IP address and continue to the next
parameter or press the clear key to change the host IP address.
If you pressed the clear key use the numeric keys to type in the IP address of the
host then press the enter key to save the new IP address.
If you type an invalid IP address, the terminal displays Bad IP Address and
returns you to the saved/default value. Press the clear key again to correct the
address then press the enter key to save it.
2. Next the terminal displays the default/saved socket port number used by the
terminal. The default value is
2500 . Press the enter key to accept the displayed
port number or press the clear key to change it using the numeric keys. When
finished press the enter key to save the socket port number and continue to the
next parameter.
If you type an invalid socket port number the terminal displays Invalid Socket
Port . and returns you to the saved/default value. Press the clear key again to
correct the port number then press the enter key to save it.
Setup Host IP
nnn.nnn.nnn.nnn
Setup Socket Port
Socket Port: 2500