ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 64 / 214

3-10 Maximus Reference Manual MANU-MAXIMUS-02
Revision-02
Initial Setup Chapter 3: Monochrome Terminals
7. After saving the DNS server IP address the terminal displays the Setup the
Submask parameter (the default subnet mask value is 255.255.255.000 ).
Press the enter key to accept the displayed subnet mask value and continue or
press the clear key then use the numeric keys to change the value. Press the
enter key to save the new subnet mask to continue.
If you type an invalid subnet mask value, the terminal displays Bad IP Address .
Press the clear key again, correct the value then press the enter key to
continue.
8. Next the terminal displays DHCP Option Code setting. The default value is 0
(zero) which is “Pad, set by Protocol”.
Press the enter key to accept the displayed DHCP Option Code or press the
clear key then use the numeric keys to change the code. Press the enter key to
save the new code and continue.
If you type an invalid code, the terminal displays Out of Range .
Press the clear key again, correct the code, then press the enter key to
continue.
Setup the SubMask
255.255.255.000
DHCP Option Code
0