ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 39 / 214

Chapter 2: Installation Terminal Installation
MANU-MAXIMUS-02 Maximus Reference Manual 2-7
Revision-02
Figure 2-4 Separating the Terminal from the Base
Mounting the Terminal
When you have run the necessary communication wiring to the terminal location and
arranged for a power source, you can mount the terminal on the wall.
1. Choose a flat, smooth, interior wall for the terminal’s location. You will mount
the Maximus using 4mm / #8 pan head screws in four places. Refer to
Figure 2-2
on page 2-5 or use the mounting template (Part Number 06-1100-02) to mark
the wall prior to any drilling. To meet ADA recommendations for forward reach,
position the screw locations / template so the bottom of the mounting base is
39 inches (99cm) above the floor.
Spring-
Loaded
Pin