ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 156 / 214

5-4 Maximus Reference Manual MANU-MAXIMUS-02
Revision-02
Maintenance Chapter 5: Maintenance
Maintenance
The Maximus is a low-maintenance data collection terminal. The only required procedure is
periodic cleaning of the badge reader, finger sensor, or other input device.
Cleaning the Terminal
To clean a terminal’s exterior, moisten a cleaning cloth with a commercial or domestic hard-
surface cleaner and wipe the terminal exterior to clean it.
Since dried residue of cleaning product could become a future problem for the terminal’s
electrical and mechanical connections, avoid gross application of cleaning product and do not
spray cleaning product directly onto the terminal.
These instructions do not apply to the interior of the terminal. See the following instructions
for cleaning badge and fingerprint readers.
Cleaning the Badge Reader
To clean the badge reader, swipe a cleaning card premoistened with isopropyl alcohol (rubbing
alcohol) through the reader several times. Low-usage readers should be cleaned monthly.
High-usage readers should be cleaned weekly.
Although the finger sensors used in ATS terminals have few maintenance and handling
requirements, a few basic precautions help ensure a high level of performance over the life of
the sensor.
Deposits from fingers accumulate on the surface of the finger sensor after repeated use. These
deposits may be from natural oils from the finger or from dirt, grease, or lotions. These
deposits may effect sensor operation, so you should clean the sensor as required by your
environment. In normal use, we recommend cleaning the sensor once a month, or any time a
residue is visible on the sensor surface or when the reader performance degrades.