Atmos A45 Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 64

background image

Operation and Maintenance Manual - GB

G

B

www.atmos.cz

GB-61

GUARANTEE TERMS

1. On condition of observance of the way of use, operation and maintenance described in the ma-

nual we guarantee that the product will have the characteristics defined by the relevant technical
standards and conditions for the whole guarantee period, namely for 24 months from acceptance
by the consumer and max. 32 months from the date of sale by the manufacturer to the sales repre-
sentative.

2. If the product exhibits a defect in the guarantee period that was not caused by the user, the product

will be repaired free of charge for the customer within the guarantee terms.

3. The guarantee period will be extended by the time period for which the product was repaired.

4. The customer shall submit claims for guarantee repairs to the customer service.

5. The guarantee for the burner is only valid if the assembly of the burner and boiler was performed

by a person trained by the manufacturer in accordance with valid standards and the operation ma-
nual. A condition for acknowledgment of any guarantee is legible and complete filling-in of data
about the company that carried out the installation on page 62. If the burner gets damaged due to
inexpert damage, the resulting costs will be borne by the company that carried out the assembly.

6. The buyer has been provably instructed how to use and operate the product.

7. Requests for repairs after the expiration of the guarantee period are also directed by the customer

to the customer service. In this case the costs of the repair are borne by the customer.

8. The user is obliged to observe instructions in the operation and maintenance manual. In case of

non-observance of the operation and maintenance manual, careless or inexpert handling or bur-
ning of prohibited fuel the guarantee becomes invalid and repairs of possible damages are paid by
the customer.

9. At least once a year the burner must be completely inspected, checked and cleaned by a speciali-

zed company, which will confirm all the performed work in the operation manual on page 63 and
further.

Guarantee and after-guarantee repairs are provided by:
- The company that represents the ATMOS Company in the particular country for the

particular region

- The assembly company that installed the product
- Jaroslav Cankař a syn ATMOS,
Velenského 487, 294 21 Bělá pod Bezdězem, Czech Republic, phone +420 326 701 404

«
...
59
60
61
62
63
...
»

Содержание A45

































































Отзывы:

Нет отзывов

Похожие инструкции для A45

Бренд: T&C Страницы: 8

Бренд: Vermont Castings Страницы: 60

Бренд: Twin Eagles Страницы: 17

Бренд: Twin Eagles Страницы: 22

Бренд: Unigas Страницы: 32

Бренд: Unigas Страницы: 56

SureFire II HDHESI

Бренд: Fireye Страницы: 15

Бренд: Magic Chef Страницы: 22

Бренд: Unigas Страницы: 116

Бренд: baltur Страницы: 72

Бренд: Renaissance Cooking Systems Страницы: 3

Бренд: Town & Country Fireplaces Страницы: 8

Бренд: Town & Country Fireplaces Страницы: 20

Бренд: Town & Country Fireplaces Страницы: 48

Бренд: Town & Country Fireplaces Страницы: 52

Бренд: Town & Country Fireplaces Страницы: 56

Бренд: Riello Страницы: 16

Бренд: Riello Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды