G
B
www.atmos.cz
30-GB
Operation and Maintenance Manual - GB
22. Control and setting of the burner
Display and control panel
The electronic control unit of the burner is equipped with four keys for easy and intuitive control.
Enter -
key
for confirming
a command and parameter or
for entering a menu
Esc -
key
for return
from a menu
Up arrow
- key
for browsing
in the menus or for
increasing
the value of a parameter
Down arrow
- key
for browsing
in the menus or for
decreasing
the value of a parameter
INFO
- To open the
Main Menu, press the Enter key
.
The
PARAMETER
submenu will appear on the display. To change the basic
permitted parameters
of the burner, confirm again - press the
Enter
key.
To switch off
OFF (STOP)
or to switch on
ON (START)
the burner or to get to the
INFORMA-
TION, PASSWORD
or
TESTING
submenus, do not confirm the
(PARAMETER)
submenu, but
continue with the up or down arrow. Always confirm the
ON (START)
and
OFF (STOP)
command
or entering the particular submenu by pressing the
Enter
key. In the same way you can browse and
open
individual menus
and particular
parameters
in the menus. You can
enter specific values or
numbers
with the
up ( + ) or down ( - ) arrow
. Confirm the desired value with the
Enter
key. To
return one step backwards or completely to the main screen press the
Esc
key once or repeatedly.
Display with keys:
1. Information about the burner status
START
– start-up stage
RUN
– normal operation
STOP
– burning-down stage or
stand-by mode
2. Temeperature
TV
(see page 49) – only if TS
and TV sensor are connected
3. Temeperature
TS
(see page 49) – only if TS
and TV sensor are connected
4. Symbol line – information about the
operation
of
particular
devices
of
the burner (see page 55)