Atmos A45 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 64

background image

G

B

www.atmos.cz

4-GB

Operation and Maintenance Manual - GB

1. General information

WARNING

- Before starting the burner you must get thoroughly acquainted with all provisions

of this manual. The manufacturer is not liable for damages caused by operation, maintenance
or wrong setting of the power of the burner that will cause heat overloading of the burner.

Introduction

This manual is intended for all users and contains information necessary for the installation,

start-up, maintenance and safe operation of the burner.

We recommend you to pay great attention to the safety regulations. Interventions that require

removal of some parts should be carried out carefully by qualified authorized experts. Repairs and
settings that are not described in the manual should not be carried out at all.

Application

The burner is designed for ATMOS D30P, D31P, P31 and D45P special boilers.

Technical specifications

Name:

ATMOS A45

Prescribed fuel:

high-quality (white) wooden pellets with the diameter of 6 to 8 mm, length of 5 to

25 mm and calorific value of 16 - 19 MJ.kg

-1

Nominal heat input of the burner:

49 kW

Minimum heat input of the burner:

8,5 kW

Maximum heating surface of the boiler that the burner may be installed in:

5 m

2

Fuel bin:

not part of the delivery - recomended volume 1000 l

Fuel feeding:

with an external worm conveyor type DRA50, DA50 - not part of the delivery

Burner control:

with an AC07X (AC07) electronic control unit that controls the operation of the

external conveyor, two ignition spirals and the fan in accordance with requirements of the boiler and
the heating system. The electronic system is protected with the safety thermostat of the boiler, safety
thermostat at the pellet supply to the burner, the fan speed transducer and the flame sensing photocell.
The operation of the burner is indicated on the electronic control display.

Power supply:

230 V / 50 Hz

Maximum power input at the start with one ignition element:

480 W - normal setting

Maximum power input at the start with two ignition elements:

1042 W - special functions

Average power input at the nominal heat input operation:

47 W

Average power input at the minimum heat input operation:

29 W

Average heat input in the standby mode:

3.3 W

Prescribed fuse protection of the burner with the boiler:

6.3 A

Acoustic pressure level (noisiness):

47 dB

Burner weight:

23 kg

Burner dimensions, WxHxD:

31 x 55 x 66 cm

Minimum dimensions of the combustion chamber:

diameter / width = 400 mm, length / depth = 400 mm

Minimum ashpan space of the boiler:

must correspond to operation at the nominal output for at

least one week. (min. 4 l)

Minimum vacuum in the combustion chamber of the boiler:

2 Pa

Min. protection against inadvertent opening of the boiler chamber (door):

with a safety screw

(except DxxP)

«
...
2
3
4
5
6
...
»

Содержание A45

































































Отзывы:

Нет отзывов

Похожие инструкции для A45

Бренд: Riello Страницы: 44

Бренд: Riello Страницы: 40

Бренд: Riello Страницы: 60

Бренд: Dantherm Страницы: 11

Бренд: Lamborghini Caloreclima Страницы: 56

Бренд: Unigas Страницы: 57

ATTITUDE 2go CV

Бренд: Campingaz Страницы: 105

Бренд: Unigas Страницы: 116

Бренд: Ivation Страницы: 5

Бренд: EOGB Страницы: 17

Бренд: EOGB Страницы: 20

Бренд: Beckett Страницы: 16

Бренд: CIB UNIGAS Страницы: 48

DB9 LSE C13 TC FS1 A0

Бренд: Riello Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды