Atmos A45 Скачать руководство пользователя

Страница: 3 / 64

Operation and Maintenance Manual - GB

www.atmos.cz

GB-3

CONTENTS

1. General information

Introduction

Application

Technical specifications

2. Design

Description

3. Burner accessories

4. Safety, burner installation and commissioning

Safety and connection of the burner to the boiler

Basic dimensions of the opening for installation of the burner in a boiler

5. Type of environment and location of the boiler with the burner in the boiler room

6. Chimneyn

7. Flue gas duct of the boiler

8. Fire protection within the installation and use of heat appliances

9. Basic connection diagram of a D30P, D31P, P31 a D45P boiler with an accumulation tank for burner

control on the basis of TS and TV sensors

10. Connection of boilers D30P, D31P, P31 a D45P with an accumulation tank for burner control on the basis

of TS and TV sensors and control of the boiler pump on the basis of the TK sensor

11. Connection of boilers D30P, D31P, P31 a D45P with an accumulation tank with solar heating for burner

control on the basis of TS, TK and TV sensors (automatic sensor switching function), function of controlling

the solar pump based on TSV and TS tempera

12. Connection of boilers D30P, D31P, P31 a D45P with electronic regulation ACD01 and accumulation tank

with solar heating

13. Connection of boilers DCxxS, CxxS, ACxxS, KCxxS, DCxxRS with built-in burner in upper doors with

accumulation tank for regulation of the burner based on sensors TS and TV and control of boiler pump

based on TK sensor

14. Connection of boilers DCxxS, CxxS, ACxxS, KCxxS, DCxxRS with built-in burner in upper doors and

with ACD01 electronic regulation

15. Connection of the boiler and burner to the electric mains

16. Connection diagram of the electronic unit AC07X

17. Electric diagram of the burner ATMOS A45 - 6-pin connector - model 2012 AC07X - (R, R2, sensors TV,

TS, TK, TSV)

18. Electric wiring diagram connection of the boilers D30P, D31P, P31 a D45P with extraction fan, model

2012 with 6-pin connector and module AD02 - to control extraction fan of the boiler from burner control

unit AC07X (R)

19. Electric wiring diagram connection of the boilers D30P, D31P, P31 a D45P with extraction fan, model

2012 with 6-pin connector and module AD03 - to control extraction fan of the boiler and pump in the

boiler circuit from burner control unit AC07X (R and

20. Electric wiring diagram connection of the boilers DCxxS(X), DCxxS, ACxxS, DCxxRS with extraction

fan, model 2012 with 6-pin connector and module AD03 - to control extraction fan of the boiler and pump

in the boiler circuit from burner control unit AC07

21. Commissioning

22. Control and setting of the burner

Display and control panel

Passwords and their functions

PARAMETERS menu

Setting the required power and combustion quality:

INFORMATION menu

TESTING menu

23. Information - error messages - troubleshooting

General troubleshooting

Table of error messages on the display - alarms

If no problem has been found, reset the regulation AC07X by the RESTART command.

If the system is working, but you are not satisfied with its function, proceed as follows:

24. Maintenance and cleaning of the burner

25. List of spare parts

26. Expanded view of the burner

GUARANTEE TERMS

RECORD OF INSTALLATION OF THE BOILER AND BURNER

ANNUAL INSPECTIONS RECORDS

RECORDS OF GUARANTEE PERIOD AND POST-GUARANTEE PERIOD REPAIRS

Содержание A45

































































Результаты поиска

Содержание A45

Отзывы:

Похожие инструкции для A45

Бренды по названию

Популярные бренды

Atmos A45, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание A45

Отзывы:

Похожие инструкции для A45

Бренды по названию

Популярные бренды