Page 94
BCX Series Operating Manual
The best way to learn this cabinet programming page is to experiment. Below is an
example of a programmed test.
Notice that as a condition is chosen, the button will “light” up indicating that it is
activated for that step.
When all of the desired changes have been made to a test, it is required to save the
changes. This is done by using the mouse, placing the cursor over the “save changes”
button and clicking once with the left mouse key. The computer will ask if the file
should be replaced. The file MUST be replaced to save the changes.
Use the return button to go back to the MAIN MENU page.
NOTE: Some displayed features are optional and not on each cabinet. They can be used only if the
options were purchased with the cabinet.
