manualshive.com logo in svg

Atlas BCX Series, Руководство по эксплуатации

Поделиться
Скачать
Atlas BCX Series Скачать руководство пользователя страница 76

Page  76

                                        

BCX Series Operating Manual                                  

 

 
The screen below shows further examples of how to change what is displayed on the 
screen.  Using the mouse, position the pointer over one of the black boxes next to the 
name of the items being graphed.  With one click of the left mouse key, the graphing 
line can be 
turned on 
and off for 
display.  
This will 
not affect 
what is 
being 
logged, only 
what is 
being 
displayed.   
 
Using the 
mouse, 
experiment 
with the 
graph 
display keys to change the X and Y axes ranges.  This will allow for close up 
examination of the data being displayed. 
 
The green recording shows the status of the datalogging feature.  If it is green, and has 
the word “Recording” in it, then data is being saved to the hard drive.  If it is red and 
has the word “Not Recording” in it, then data is not being saved to the hard drive.  The 
status of recording feature can be changed in the “ADJUST MACHINE 
PARAMETERS” section of the controller.   
 
User notes can also be typed into the “note pad record” box.  After a note is typed in, 
using the mouse press the button just to right of the box.  Prior to pressing it, the 
button will be green and have the words “Press to log Note” in it.  When it is pressed, 
it will be yellow and read “Note will be logged at next data log interval.”  The box 
will remain yellow until the next data point is saved to the hard drive, as set by the 
user.  When logged, the box will revert to its original green color.   
 
The best way to become familiar with all of the features of this page is to experiment.  
Nothing can be damaged with this experimentation.  The user is encouraged to adjust 
all of the available features until comfortable with how to use them. 

Содержание BCX Series




























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды