Art Flystick3, Руководство пользователя системы, Страница: 33 / 275

Chapter
4
4.2
ARTTRACK5/C
Figure 4.4: Camera ARTTRACK5/C
Major changes of the measurement volume may require different lenses and thus a new
determination of camera parameters. These changes have to be done at the
ART labs.
Be aware that a tracking system is very sensitive to camera movements. Therefore the
cameras have to be mounted in a way that camera movements (especially vibrations) are
reduced as much as possible.
Z
Mounting on tripods may be sufficient for presentations and prelimi-
nary installations, but is not recommended as a permanent solution!
If you want to mount the camera on a tripod just mount the carrier on any side of the
camera body and then the remote camera head on the opposite side using a ceiling
mount.
The carrier for the ARTTRACK5/C can be attached on all 4 sides of the camera body.
Attach the carrier with the T-piece pointing to the back of the camera in a similar way to
figure 4.2 on page 30. Note, the ceiling suspension is already connected to the carrier
in figure 4.2. The
ARTTRACK5/C remote camera head should be installed using the M6
mounting threads on its back as shown in figure 4.5 on page 34.
Z
The ARTTRACK5/C remote head has to be connected to its corre-
sponding camera body. During mounting please ensure matching se-
rial numbers for both parts !
Only use screws supplied with the ceiling mount for mounting it. Do
not use standard screws for connection of the remote camera head
due to limited space between thread and cable. Also, use all the parts
supplied with the ceiling mount - especially the toothed washer is quite
important.
33