Art Flystick3 Скачать руководство пользователя страница 143

Страница: 143 / 275

Chapter

8.4 Menu DTrack2

(a) Select a configuration

(b) Create a new configuration

Figure 8.9: Managing the configurations

•

’

clone current configuration

’

all existing calibrations (room and body calibration) and flash settings are inherited
from the currently active configuration.

•

’

create with default values

’

the system will start from scratch - i.e. as manufactured. The system will not have a
valid room calibration or any body calibrations.

Just press

Create

and the configuration is saved on the controller.

It is possible to protect the settings of any configuration with a password by pressing the
button

Lock

. You will be asked to enter a new password to lock your configuration.

Locking the configuration does not provide access-control!

Only

changes in settings / calibrations are disabled.

In case you forget the password please call

ART

for assistance

Any existing configuration may be activated by selecting the corresponding entry and
clicking

Apply

. Quit this dialogue by pressing

Exit

- the configuration is loaded.

Only existing configurations without password-protection can be deleted. Select the entry
to be deleted and click

Delete

8.4.2.1 Backup of Configurations

It is possible to export and re-import single configurations or to backup all settings at
once. ’

Load

’ imports previously saved configurations. The imported configuration will be

activated automatically. It is possible to import multiple configurations at the same time.
’

Save

’ will open a window for selecting the configuration(s) to export. Either (de-)select

individual configurations by left-clicking or

select all

. Tick the checkbox

all settings and

conigurations (backup)

to save a complete backup of your system’s settings. Press ’

Save

’

to select a destination directory on a remote PC. Please also refer to chapter 9.1 on page
192 for further information.

143

Содержание Flystick3




















































































































































































































































































Результаты поиска

Содержание Flystick3

Отзывы:

Art Flystick3, Руководство пользователя системы, Страница: 143 / 275

Результаты поиска

Содержание Flystick3

Отзывы: