Art Flystick3 Скачать руководство пользователя страница 130 | Manualshive

Страница: 130 / 275

Art Flystick3 Скачать руководство пользователя страница 130

8

DTrack2

frontend software

Command string

Description

dtrack2 tracking start

Start tracking

dtrack2 tracking stop

Stop tracking

dtrack2 system shutdown

Shut down controller (WOL active)

dtrack2 system reboot

Reboot controller

dtrack2 get config active_config

Get currently active config ID, e.g.

’con-

fig20160808102933552’

dtrack2 set config active_config <ID>

Select an existing configuration. Warning: Must
use <ID>, not name of configuration, except for
default configuration (see next entry). Find under

Edit

button, e.g. ’config20160808102933552’

dtrack2 set config active_config standard

Set back to default configuration

dtrack2 get status active

Check whether tracking is currently measuring:

none

(stopped),

mea

(measuring),

cal

(running

a calibration),

wait

(waiting for external sync in-

put) or

err

(error in starting measurement)

dtrack2 get system access

Check whether control connection can be
established:

full

if accessible,

none

if not.

none

usually means another front-end is connected

supported on 2nd connection

dtrack2 get system accessed_by

Ask who is currently connected with full access,
e.g. to find front-end blocking shutdown from
Crestron/AMX

supported on 2nd connection

Table 8.2: Remote command strings

To send a command, a TCP connection to port 50105 of the server has to be opened and
the commands (see table 8.2 on page 130) can be sent. The controller replies with ei-
ther "dtrack2 ok" or with an error message for commands and set requests, or with result
strings in case of a get request.

Z

Please ensure that the commands are sent exactly in the given way,
with exactly one blank (

0x20

) between the elements and no trailing

blanks, CR or LF characters, but including a trailing

NUL

(

0x00

) char-

acter.

Multiple remote connections

DTrack2

allows multiple clients to connect to the con-

troller, but only the first connection is allowed to send commands except for those listed for
secondary connections above. Therefore, scripts can test whether another client is con-
nected to the controller. To do this, the command

dtrack2 get system access

checks

the availability. It must return

full

; if it returns

none

, another process is already connected

to the command port. In this case, the request

dtrack2 get system accessed_by

can be

used to find the host of the connection.

It is recommended to use DTrackSDK (available under C++ and Java) to implement com-
mand support into own software and to use the

DTrack2

CLI software to send commands

from scripts. Both DTrackSDK and

DTrack2

CLI are available for Windows and Linux,

and can be downloaded after registering on the support part of the

ART

web page at

http://www.ar-tracking.com/support/

130

«
...
128
129
130
131
132
...
»

Содержание Flystick3




















































































































































































































































































Отзывы:

Нет отзывов