Art Flystick3, Руководство пользователя системы, Страница: 216 / 275

9 Frequently asked questions (FAQ)
etry calibration .
• Double-check that the diffusor spheres (not applicable for FINGERTRACKING2) are
not broken or missing.
The Fingertracking output data is not transmitted.
Go to Settings
→
Output and check if the data output is configured correctly:
• data receiver defined (’ send to ’),
•
identifiers ’ gl ’ and ’ glcal ’ selected.
Is it possible to upgrade to the 3-finger or the 5-finger version?
Yes, if you are currently using the non-tactile 3-finger version you may also use 5-finger
thimble sets and vice versa. Tactile thimbles are available for 3 fingers only. Please
contact
ART to receive more information.
9.12 Measurement Tool
I’m using the Measurement Tool demo but I cannot measure any points.
Please check whether both, the Measurement Tool and the Measurement Tool reference
body (if assigned), are tracked.
It is not possible to perform a tip calibration.
Please check whether both, the Measurement Tool and the Measurement Tool reference
body (if assigned), are tracked.
Then, try to keep the tip in the same position while doing the tip calibration. Therefore, tilt
the Measurement Tool in both room directions, not only in one direction (i.e. left and right,
as well as back and forth). When rotating around one axis only, a tip position cannot be
defined.
9.13 Active Targets
Operation near plasma screen
A plasma screen is a very strong IR source which overdrives the IR receiver in the active
target (e.g. active Flystick3 (discontinued), Fingertracking). Thus, active targets may not
work properly near plasma screens. If possible use passive targets as alternative.
216