Art Flystick3 Скачать руководство пользователя страница 3

Страница: 3 / 275

Warranty regarding further use of the open source software

A.R.T. GmbH provides no warranty for the open source software programs

contained in this product, if such programs are used in any manner other than

the program execution intended by A.R.T. GmbH. The licenses define the

warranty, if any, from the authors or licensors of the open source software.

A.R.T. GmbH specifically disclaims any warranties for defects caused by

altering any open source software program or the product’s configuration. You

have no warranty claims against A.R.T. GmbH in the event that the open source

software infringes the intellectual property rights of a third party. Technical

support, if any, will only be provided for unmodified software. The full license

text can be obtained from A.R.T. GmbH directly.

Disclaimer

In no event shall A.R.T. GmbH be liable for any incidental, indirect, or

consequential damages whatsoever (including, without limitation, damages for

loss of business profits, business interruption, loss of business information, or

any other pecuniary loss) arising out of the use of or inability to use the software

or hardware.

1999 - 2018 by A.R.T. GmbH

Am Öferl 6

D-82362 Weilheim i. OB

Germany

+49 (0)881-92530-00

+49 (0)881-92530-01

http://www.ar-tracking.de

Содержание Flystick3




















































































































































































































































































Результаты поиска

Содержание Flystick3

Отзывы:

Art Flystick3, Руководство пользователя системы, Страница: 3 / 275

Результаты поиска

Содержание Flystick3

Отзывы: