manualshive.com logo in svg

ARM Cortex r1p3, Техническое справочное руководство

Продукт ARM Cortex r1p3 - это процессор нового поколения, предоставляющий высокую производительность и энергоэффективность. Техническое руководство для данного устройства доступно для скачивания бесплатно на нашем сайте. Обратитесь к книге "Technical Reference Manual" для получения подробной информации. ¡Скачайте ее с manualshive.com прямокий сейчас!

Поделиться
Скачать
background image

Level One Memory System 

ARM DDI 0363E

Copyright © 2009 ARM Limited. All rights reserved.

8-8

ID013010

Non-Confidential, Unrestricted Access

External faults

A memory access performed through the AXI master interface can generate two different types 
of error response, a slave error (SLVERR) or decode error (DECERR). These are known as 
external errors, because they are generated by the AXI system outside the processor. Precise 
aborts are generated for instruction fetches, data loads, and data stores to strongly-ordered-type 
memory. Stores to normal-type or device-type memory generate imprecise aborts. 

Note

 An AXI slave that cannot handle exclusive transactions returns OKAY in response to an 
exclusive read. This is also treated as an external error, and the processor behaves as if the 
response was SLVERR.

Cache and TCM parity and ECC errors

If the processor has been configured with the appropriate build options, it can detect data errors 
occurring in the cache and TCM RAMs using parity or ECC logic. For more information on 
cache errors, see 

Handling cache parity errors

 on page 8-21 and 

Handling cache ECC errors

 

on page 8-22. For more information on TCM errors, see 

Handling TCM parity errors

 on 

page 8-15 and 

Handling TCM ECC errors

 on page 8-15. Depending on the software 

configuration of the processor, these errors are either ignored, generate an abort, are 
automatically corrected without generating an abort, or are corrected and generate an abort. If 
the processor is in debug-halt-state, an error that is otherwise automatically corrected generates 
an abort.

Parity and ECC errors can only occur on reads, although these reads might be a side-effect of 
store instructions. Aborts generated by loads are always precise. Aborts generated by store 
instructions to the TCM are also always precise, while those to the cache are always imprecise. 
These errors can also occur on some cache-maintenance operations, see 

Errors on cache 

maintenance operations

 on page 8-23, and generate imprecise aborts.

Many of the parity and ECC errors are also signaled by the generation of events. See Chapter 6 

Events and Performance Monitor

. Some of these events are generated when the error is 

detected, regardless of whether or not an abort is taken. Aborts are only taken when a memory 
access with an error is committed. Others are signaled when and only when the abort is taken.

Any parity or ECC error that can be corrected by the processor is considered to be a 

correctable 

fault

, regardless of whether or not the processor is configured to correct the fault.

TCM external faults

The TCM port includes signals that can be used to signal an error on a TCM transaction. See the 

Cortex-R4 and Cortex-R4F Integration Manual

 for more information about the TCM port. If 

enabled, this causes the processor to take the appropriate type of abort for instruction and data 
accesses, or to generate a SLVERR response to an AXI-slave transaction. Write transactions 
always generate imprecise aborts, while read transactions always generate precise aborts.

An error signaled on a read transaction can also signal a retry request, which requests that the 
processor retry the same operation rather than take an exception.

A retry request from the TCM port is considered to be a 

recoverable error

. All correctable ECC 

faults are also considered to be recoverable.

Содержание Cortex r1p3









































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Cortex r1p3

Wahl james MARTIN ZX902 Instructions Manual preview
james MARTIN ZX902
Бренд: Wahl Страницы: 12
Avenview DVI-SPLITPRO-2X User Manual preview
DVI-SPLITPRO-2X
Бренд: Avenview Страницы: 24
Navitar 484MCZ500 Installation Instructions preview
484MCZ500
Бренд: Navitar Страницы: 1
Navitar 648MCL1028 Installation Instructions preview
648MCL1028
Бренд: Navitar Страницы: 1
Navitar 642MCL1028 Installation Instructions preview
642MCL1028
Бренд: Navitar Страницы: 1
Navitar 606MCZ087 Installation Instructions preview
606MCZ087
Бренд: Navitar Страницы: 1
Ventray BabyGrow Elite User'S Manual Manual preview
BabyGrow Elite
Бренд: Ventray Страницы: 10
Kambrook KFP80 Essentials Owner'S Manual preview
KFP80 Essentials
Бренд: Kambrook Страницы: 16
Hamilton Beach 70450C Owner'S Manual preview
70450C
Бренд: Hamilton Beach Страницы: 40
Taurus ROWZER Manual preview
ROWZER
Бренд: Taurus Страницы: 11
Gorenje SIC 400 EA Instructions For Use Manual preview
SIC 400 EA
Бренд: Gorenje Страницы: 24
Gorenje SBR800HC Instruction Manual preview
SBR800HC
Бренд: Gorenje Страницы: 78
Gorenje SD-450 EA Instructions For Use Manual preview
SD-450 EA
Бренд: Gorenje Страницы: 16
Fbt QUBE SP27 Manual preview
QUBE SP27
Бренд: Fbt Страницы: 44
Fbt MS02-CD3/T Manual preview
MS02-CD3/T
Бренд: Fbt Страницы: 44
XLT Systems XCU 190 Installation Instructions Manual preview
XCU 190
Бренд: XLT Systems Страницы: 21
Orban 8182A Operating Manual preview
8182A
Бренд: Orban Страницы: 62
Intel XScale Core Developer'S Manual preview
XScale Core
Бренд: Intel Страницы: 220

Бренды по названию

Популярные бренды

Загрузить еще бренды