manualshive.com logo in svg

ARM Cortex r1p3, Техническое справочное руководство

Продукт ARM Cortex r1p3 - это процессор нового поколения, предоставляющий высокую производительность и энергоэффективность. Техническое руководство для данного устройства доступно для скачивания бесплатно на нашем сайте. Обратитесь к книге "Technical Reference Manual" для получения подробной информации. ¡Скачайте ее с manualshive.com прямокий сейчас!

Поделиться
Скачать
background image

Glossary 

ARM DDI 0363E

Copyright © 2009 ARM Limited. All rights reserved.

Glossary-14

ID013010

Non-Confidential, Unrestricted Access

Unsupported values

Specific data values that are not processed by the hardware but bounced to the support code for 
completion. These data can include infinities, NaNs, subnormal values, and zeros. An 
implementation is free to select which of these values is supported in hardware fully or partially, 
or requires assistance from support code to complete the operation. Any exception resulting 
from processing unsupported data is trapped to user code if the corresponding exception enable 
bit for the exception is set. 

Victim

A cache line, selected to be discarded to make room for a replacement cache line that is required 
as a result of a cache miss. The way in which the victim is selected for eviction is 
processor-specific. A victim is also known as a cast out.

Warm reset

Also known as a core reset. Initializes the majority of the processor excluding the debug 
controller and debug logic. This type of reset is useful if you are using the debugging features 
of a processor.

Watchpoint

A watchpoint is a mechanism provided by debuggers to halt program execution when the data 
contained by a particular memory address is changed. Watchpoints are inserted by the 
programmer to enable inspection of register contents, memory locations, and variable values 
when memory is written to test that the program is operating correctly. Watchpoints are removed 
after the program is successfully tested. 

See also

 Breakpoint.

Way

See 

Cache way.

WB

See 

Write-back.

Word

A 32-bit data item.

Word-invariant

In a word-invariant system, the address of each byte of memory changes when switching 
between little-endian and big-endian operation, in such a way that the byte with address A in 
one endianness has address A EOR 3 in the other endianness. As a result, each aligned word of 
memory always consists of the same four bytes of memory in the same order, regardless of 
endianness. The change of endianness occurs because of the change to the byte addresses, not 
because the bytes are rearranged. The ARM architecture supports word-invariant systems in 
ARMv3 and later versions. When word-invariant support is selected, the behavior of load or 
store instructions that are given unaligned addresses is instruction-specific, and is in general not 
the expected behavior for an unaligned access. 

See also 

Byte-invariant.

Write

Writes are defined as operations that have the semantics of a store. That is, the ARM instructions 

SRS

, 

STM

, 

STRD

, 

STC

, 

STRT

, 

STRH

, 

STRB

, 

STRBT

, 

STREX

, 

SWP

, and 

SWPB

, and the Thumb instructions 

STM

, 

STR

, 

STRH

, 

STRB

, and 

PUSH

. 

Write-back (WB)

In a write-back cache, data is only written to main memory when it is forced out of the cache on 
line replacement following a cache miss. Otherwise, writes by the processor only update the 
cache. Also known as copyback.

Write buffer

A block of high-speed memory, arranged as a FIFO buffer, between the data cache and main 
memory, whose purpose is to optimize stores to main memory. 

Write completion

The memory system indicates to the processor that a write has been completed at a point in the 
transaction where the memory system is able to guarantee that the effect of the write is visible 
to all processors in the system. This is not the case if the write is associated with a memory 
synchronization primitive, or is to a Device or Strongly Ordered region. In these cases the 
memory system might only indicate completion of the write when the access has affected the 
state of the target, unless it is impossible to distinguish between having the effect of the write 
visible and having the state of target updated. This stricter requirement for some types of 
memory ensures that any side-effects of the memory access can be guaranteed by the processor 
to have taken place. You can use this to prevent the starting of a subsequent operation in the 
program order until the side-effects are visible.

Содержание Cortex r1p3









































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Cortex r1p3

Kambrook KFP100 User Manual preview
KFP100
Бренд: Kambrook Страницы: 24
JBL SOURCE Service Manual preview
SOURCE
Бренд: JBL Страницы: 47
WHALELOVE LS-BE617 Instruction Manual preview
LS-BE617
Бренд: WHALELOVE Страницы: 11
Premier PBM-501L Installation Instructions preview
PBM-501L
Бренд: Premier Страницы: 2
Siemens MK880FQ1 Operating Instructions Manual preview
MK880FQ1
Бренд: Siemens Страницы: 66
Siemens TK 50 N 01 Operating Instructions Manual preview
TK 50 N 01
Бренд: Siemens Страницы: 71
Siemens MK551 series Operating Instructions Manual preview
MK551 series
Бренд: Siemens Страницы: 118
Siemens MK3 Series Instruction Manual preview
MK3 Series
Бренд: Siemens Страницы: 159
Beaba babycook pro Instruction Manual preview
babycook pro
Бренд: Beaba Страницы: 24
ECG SP 470 Instruction Manual preview
SP 470
Бренд: ECG Страницы: 56
Hamilton Beach 62642E Instruction Manual preview
62642E
Бренд: Hamilton Beach Страницы: 16
SQ Professional BLITZ 5690 Instruction Manual preview
BLITZ 5690
Бренд: SQ Professional Страницы: 8
SQ Professional BLITZ 2 IN 1 Instruction Manual preview
BLITZ 2 IN 1
Бренд: SQ Professional Страницы: 8
H.Koenig HK8 Instruction Manual preview
HK8
Бренд: H.Koenig Страницы: 150
Orbit Armour Instruction Manual preview
Armour
Бренд: Orbit Страницы: 21
Moulinex AAT4 Manual preview
AAT4
Бренд: Moulinex Страницы: 11
Kramer VIA Connect2 Quick Start Manual preview
VIA Connect2
Бренд: Kramer Страницы: 4
Kramer VIA GO2 User Manual preview
VIA GO2
Бренд: Kramer Страницы: 86

Бренды по названию

Популярные бренды

Загрузить еще бренды