manualshive.com logo in svg

ARM Cortex r1p3, Техническое справочное руководство

Продукт ARM Cortex r1p3 - это процессор нового поколения, предоставляющий высокую производительность и энергоэффективность. Техническое руководство для данного устройства доступно для скачивания бесплатно на нашем сайте. Обратитесь к книге "Technical Reference Manual" для получения подробной информации. ¡Скачайте ее с manualshive.com прямокий сейчас!

Поделиться
Скачать
background image

Level One Memory System 

ARM DDI 0363E

Copyright © 2009 ARM Limited. All rights reserved.

8-18

ID013010

Non-Confidential, Unrestricted Access

8.5

About the caches

The L1 memory system can be configured to include instruction and data caches of varying 
sizes. You can configure whether the cache controller is included and, if it is, configure the size 
of each cache independently. The cached instructions or data are fetched from external memory 
using the L2 memory interface. The cache controllers use RAMs that are integrated into the 
Cortex-R4 macrocell during implementation.

Any access that is not for a TCM is handled by the appropriate cache controller. If the access is 
to Cacheable memory, and the cache is enabled, a lookup is performed in the cache and, if found 
in the cache, that is, a cache hit, the data is fetched from or written into the cache. When the 
cache is not enabled and for Non-cacheable memory, the accesses are performed using the L2 
memory interface.

Both caches allocate a memory location to a cache line on a cache miss because of a read, that 
is, all Cacheable locations are 

Read-Allocate

 (RA). In addition, the data cache can allocate on a 

write access if the memory location is marked as 

Write-Allocate

 (WA). When a cache line is 

allocated, the appropriate memory is fetched into a linefill buffer by the L2 memory interface 
before being written to the cache. See 

Linefill buffers and the AXI master interface

 on page 9-4. 

The linefill buffers always fetch the requested data first, and then the rest of the cache line. This 
enables the data read to be used by the pipeline without waiting for the linefill to complete and 
is known as 

critical word first

 and 

non-blocking

 behavior. If an error is reported to the L2 

memory interface for a linefill, the linefill does not update the cache RAMs, but an abort is only 
generated if the error was reported on the critical word.

If all the cache lines in a set are valid, to allocate a different address to the cache, the cache 
controller must evict a line from the cache.

Writes accesses that hit in the cache are written into the cache RAMs. If the memory location is 
marked as 

Write-Through

 (WT), the write is also performed on the L2 memory interface, so that 

the data stored in the RAM remains coherent with the external memory system. If the memory 
is 

Write-Back

 (WB), the cache line is marked as dirty, and the write is only performed on the L2 

memory interface when the line is evicted. When a dirty cache line is evicted, the data is passed 
to the Eviction Buffer in the L2 memory interface to be written to the external memory system. 
See 

Eviction buffer

 on page 9-5 for more information.

The cache controllers also manage the cache maintenance operations described in 

Cache 

maintenance operations

 on page 8-19.

Each cache can also be configured with either parity or ECC error checking schemes. If an error 
checking scheme is implemented and enabled, then the tags associated with each line, and data 
read from the cache are checked whenever a lookup is performed in the cache. See 

Cache error 

detection and correction

 on page 8-20 for more information.

For more information on the general rules about memory attributes and behavior, see the 

ARM 

Architecture Reference Manual

.

8.5.1

Store buffer

The cache controller includes a store buffer to hold data before it is written to the cache RAMs 
or passed to the AXI master interface. The store buffer has four entries. Each entry can contain 
up to 64 bits of data and a 32-bit address. All write requests from the data-side that are not to a 
TCM interface are stored in the store buffer.

Содержание Cortex r1p3









































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Cortex r1p3

VEVOR MP-FC305 Quick Start Manual preview
MP-FC305
Бренд: VEVOR Страницы: 8
Breville Kinetix Wizz BFP450 Instruction Booklet preview
Kinetix Wizz BFP450
Бренд: Breville Страницы: 44
PEERLESS Paramount PC930 Series Installation And Assembly preview
Paramount PC930 Series
Бренд: PEERLESS Страницы: 3
Bosch MultiTalent MCM6...GB Series Instruction Manual preview
MultiTalent MCM6...GB Series
Бренд: Bosch Страницы: 60
Bosch MUZ5VL1 User Manual preview
MUZ5VL1
Бренд: Bosch Страницы: 164
Bosch MMRP1 Series Instruction Manual preview
MMRP1 Series
Бренд: Bosch Страницы: 102
Bosch MSM78 Series Operating Instructions Manual preview
MSM78 Series
Бренд: Bosch Страницы: 131
Bosch MUZ5ZP1 Series User Manual preview
MUZ5ZP1 Series
Бренд: Bosch Страницы: 92
Bosch MultiTalent 3 Instruction Manual preview
MultiTalent 3
Бренд: Bosch Страницы: 24
Bosch MultiTalent 8 MC812 G Series Instruction Manual preview
MultiTalent 8 MC812 G Series
Бренд: Bosch Страницы: 65
Bosch MultiTalent 3 MCM3 GB Series Instruction Manual preview
MultiTalent 3 MCM3 GB Series
Бренд: Bosch Страницы: 60
Bosch MUM4 Instruction Manual preview
MUM4
Бренд: Bosch Страницы: 184
Bosch MUM Series Information For Use preview
MUM Series
Бренд: Bosch Страницы: 144
Bosch MUM46A1GB Operating Instructions Manual preview
MUM46A1GB
Бренд: Bosch Страницы: 20
Bosch MUM50112 Instruction Manual preview
MUM50112
Бренд: Bosch Страницы: 169
Bosch MCM40 SERIES Instruction Manual preview
MCM40 SERIES
Бренд: Bosch Страницы: 148
Bosch MUM50 Series Instruction Manual preview
MUM50 Series
Бренд: Bosch Страницы: 244
Bosch MultiTalent 3 MCM3 Series Instruction Manual preview
MultiTalent 3 MCM3 Series
Бренд: Bosch Страницы: 193

Бренды по названию

Популярные бренды

Загрузить еще бренды