Applied Biosystems 3500 Скачать руководство пользователя страница 232

Страница: 232 / 326

11.

With the tab facing you and the RFID tag to the right, install the CBC on the

autosampler. When properly installed, the CBC tabs will click as you snap them

into place on the autosampler.

12.

Click the Tray button to retract the autosampler, then close the instrument door

to initialize.

13.

In the Dashboard, click Refresh, then check the Quick View section for updated

status.

Replenish, change, flush, and store polymer

IMPORTANT!

Note the following:

Wear appropriate protection, including gloves, laboratory goggles, and coat

whenever you work with the fluids used on this instrument, or parts that may

come into contact with these fluids.

Use only the parts listed in Appendix D, “Catalog numbers“.

To minimize background fluorescence, use clean, powder-free, silicone-free latex

gloves whenever you handle the pump assembly or any item in the polymer path.

• Do not reuse a polymer pouch that has been installed on another type of

instrument. For example, if you remove a partially used polymer pouch from an

8-capillary instrument, do not reuse that polymer on a 24-capillary instrument.

• If you remove a polymer pouch for storage (2–8°C), place a pouch cap onto the

pouch, then place an empty pouch (or conditioning reagent) on the connector to

prevent desiccation of any residual polymer on the connector. Follow the

instructions in the wizard to ensure proper operation of the pouch and the

instrument.

Check the expiration date on the label to ensure that the polymer is not expired

and will not expire during intended use.

IMPORTANT!

Do not use if the product is expired, if the pouch or label is

damaged, or if the top seal is missing or damaged.

Allow the refrigerated polymer to equilibrate to room temperature (15–30°C)

before use.

In the Dashboard, click Wizards, then click Replenish Polymer (requires 10 to

20 minutes) or Change Polymer Type (requires 60 to 70 minutes).

Precautions for

use

Replenish polymer

or change polymer

type

Chapter 9

Maintain the Instrument

Replenish, change, flush, and store polymer

232

3500/3500xL Genetic Analyzer User Guide—Data Collection Software v3.1

Содержание 3500







































































































































































































































































































































Результаты поиска

Содержание 3500

Отзывы:

Похожие инструкции для 3500

Бренды по названию

Популярные бренды

Applied Biosystems 3500, Руководство пользователя

Результаты поиска

Содержание 3500

Отзывы:

Похожие инструкции для 3500

Бренды по названию

Популярные бренды