Ametek CEM/Humox, Руководство пользователя

Страница: 123 / 136

Serial Communications
|
A-11
3Ah/058d Reserved N/A
3Bh/059d Reserved N/A
3Ch/060d Reserved N/A
3Dh/061d Reserved N/A
3Eh/062d Reserved N/A
3Fh/063d Reserved N/A
40h/064d Reserved N/A
41h/065d Reserved N/A
42h/066d Reserved N/A
43h/067d Reserved N/A
44h/068d Reserved N/A
45h/069d Cal_h10 Auto calibration time 10 hour value Read and Write
46h/070d Cal_h1 Auto calibration 1 hour value Read and Write
47h/071d Cal_m10 Auto calibration 10 minute value Read and Write
48h/072d Cal_m1 Auto calibration 1 minute value Read and Write
49h/073d Ver_h10 Auto verify time 10 hour value Read and Write
4Ah/074d Ver_h1 Auto verify time 1 hour value Read and Write
4Bh/075d Ver_m10 Auto verify time 10 minute value Read and Write
4Ch/076d Ver_m1 Auto verify time 1 minute value Read and Write
4Dh/077d Dry_Press Dry Process pressure, entered by the user Read and Write
4Eh/078d Optemp The cell temperature setpoint Read and Write
4Fh/079d Reserved N/A
50h/080d Cool_flags
Flag used for internal/external cooler control
Read only
51h/081d Cool_SP External cooler set point Read and Write
52h/082d Moist_Bias The moisture bias set point Read and Write
53h/083d Reserved N/A
54h/084d Reserved N/A
55h/085d Reserved N/A
56h/086d Dry_AT Dry Cell slope Read only
57h/087d Dry_AT_ratio Dry Cell slope used during last calibration Read only
58h/088d Dry_Tc_ratio Cell/thermocouple compensation multiplier Read only
59h/089d Reserved N/A
5Ah/090d Reserved N/A
5Bh/091d Calcycle Interval between auto cals [1 hour to 90 days] Read and Write
5Ch/092d Vercycle Interval between auto verifies [1 hour to 90 days] Read and Write
5Dh/093d Alr1_flg What alarm 3 is associated with
0 - oxygen\moist
1 - in calibration
2 - in verify
Read and Write
5Eh/094d Alm3_flg Configuration for oxygen alarms, high or low. If a bit
is 1, that is the condition that the indicated alarm
will trip on.
bit 0 - low Dry oxygen
bit 1 - high Dry oxygen
bit 0 - low Wet oxygen
bit 1 - high Wet oxygen
bit 0 - low Moisture
bit 1 - high Moisture
Read and Write
5Fh/095d Gas_ctr Which gas is currently flowing to the sensor, 0 is span
gas flowing, 1 is zero gas flowing
Read only
60h/096d Calflag Which type of calibration the unit is in:
0 - In normal calibration
1 - In verify
2 - In primary cal
3 - In none of the above, normal operation
Read only
61h/097d Reserved N/A
62h/098d Dry_Cal_variable The dry calculated percent value that 0 mv would cor -
respond to with the cell that is currently being used.
This value can vary between different cells. It is
calculated during calibration and used in the dry oxy -
gen calculations.
Read only